The lecture content, including references to study materials.

The main study material is the Reinforcement Learning: An Introduction; second edition by Richard S. Sutton and Andrew G. Barto (reffered to as RLB). It is available online and also as a hardcopy.

References to study materials cover all theory required at the exam, and sometimes even more – the references in italics cover topics not required for the exam.

1. Introduction to Reinforcement Learning

 Oct 05 Slides PDF Slides Lecture Questions bandits monte_carlo

• History of RL [Chapter 1 of RLB]
• Multi-armed bandits [Sections 2-2.6 of RLB]
• Markov Decision Process [Sections 3-3.3 of RLB]

2. Markov Decision Process, Optimal Solutions, Monte Carlo Methods

 Oct 12 Slides PDF Slides Lecture Questions policy_iteration policy_iteration_exact policy_iteration_exploring_mc policy_iteration_greedy_mc

• Policies and Value Functions [Sections 3.5-3.6 of RLB]
• Value Iteration [Sections 4 and 4.4 of RLB]
  • Proof of convergence only in slides
• Policy Iteration [Sections 4.1-4.3 of RLB]
• Generalized Policy Iteration [Section 4.6 or RLB]
• Monte Carlo Methods [Sections 5-5.4 of RLB]

3. Temporal Difference Methods, Off-Policy Methods

 Oct 19 Slides PDF Slides Lecture Questions importance_sampling q_learning lunar_lander

• Model-free and model-based methods, using state-value or action-value functions [Chapter 8 before Section 8.1, and Section 6.8 of RLB]
• Temporal-difference methods [Sections 6-6.3 of RLB]
• Sarsa [Section 6.4 of RLB]
• Q-learning [Section 6.5 of RLB]
• Off-policy Monte Carlo Methods [Sections 5.5-5.7 of RLB]
• Expected Sarsa [Section 6.6 of RLB]
• N-step TD policy evaluation [Section 7.1 of RLB]
• N-step Sarsa [Section 7.2 of RLB]
• Off-policy n-step Sarsa [Section 7.3 of RLB]
• Tree backup algorithm [Section 7.5 of RLB]

4. Function Approximation, Deep Q Network

 Oct 26 Slides PDF Slides Lecture Questions td_algorithms q_learning_tiles q_network

• Function approximation [Sections 9-9.3 of RLB]
• Tile coding [Section 9.5.4 of RLB]
• Linear function approximation [Section 9.4 of RLB, without the Proof of Convergence if Linear TD(0)]
• Semi-Gradient TD methods [Sections 9.3, 10-10.2 of RLB]
• Off-policy function approximation TD divergence [Sections 11.2-11.3 of RLB]
• Deep Q Network [Volodymyr Mnih et al.: Human-level control through deep reinforcement learning]

5. Rainbow

 Nov 02 Slides PDF Slides Lecture Questions car_racing

• Double Deep Q Network (DDQN) [Hado van Hasselt et al.: Deep Reinforcement Learning with Double Q-learning]
• Prioritized Experience Replay [Tom Schaul et al.: Prioritized Experience Replay]
• Dueling Deep Q Network [Ziyu Wang et al.: Dueling Network Architectures for Deep Reinforcement Learning]
• Noisy Nets [Meire Fortunato et al.: Noisy Networks for Exploration]
• Distributional Reinforcement Learning [Marc G. Bellemare et al.: A Distributional Perspective on Reinforcement Learning]
• Rainbow [Matteo Hessel et al.: Rainbow: Combining Improvements in Deep Reinforcement Learning]

6. Policy Gradient Methods

 Nov 09 Slides PDF Slides Lecture Questions reinforce reinforce_baseline cart_pole_pixels

• Policy Gradient Methods [Sections 13-13.1 of RLB]
• Policy Gradient Theorem [Section 13.2 of RLB]
• REINFORCE algorithm [Section 13.3 of RLB]
• REINFORCE with baseline algorithm [Section 13.4 of RLB]
• Actor-Critic methods [Section 13.5 of RLB, without the eligibility traces variant]
• A3C and asynchronous RL [Volodymyr Mnih et al.: Asynchronous Methods for Deep Reinforcement Learning]

7. PAAC, Continuous Actions, DDPG

 Nov 16 Slides PDF Slides Lecture Questions paac paac_continuous ddpg

• PAAC [Alfredo V. Clemente et al.: Efficient Parallel Methods for Deep Reinforcement Learning]
• Gradient methods with continuous actions [Section 13.7 of RLB]
• Deterministic policy gradient theorem (DPG) [David Silver et al.: Deterministic Policy Gradient Algorithms]
• Deep deterministic policy gradient (DDPG) [Timothy P. Lillicrap et al.: Continuous Control with Deep Reinforcement Learning]

8. TD3, SAC, TRPO, PPO

 Nov 23 Slides PDF Slides Lecture Questions walker walker_hardcore sac_bonus

• Twin delayed deep deterministic policy gradient (TD3) [Scott Fujimoto et al.: Addressing Function Approximation Error in Actor-Critic Methods]
• Soft actor-critic (SAC) [Tuomas Haarnoja et al.: Soft Actor-Critic: Off-Policy Maximum Entropy Deep Reinforcement Learning with a Stochastic Actor]
• Natural policy gradient (NPG) [Sham Kakade: A Natural Policy Gradient]
• Truncated natural policy gradient (TNPG), Trust Region Policy Optimalization (TRPO) [John Schulman et al.: Trust Region Policy Optimization]
• Proximal policy optimization (PPO) [John Schulman et al.: Proximal Policy Optimization Algorithms]

9. Eligibility traces, V-trace, IMPALA

 Nov 30 Slides PDF Slides Lecture Questions trace_algorithms

• Off-policy correction using control varietes [Section 7.4 of RLB]
• Eligibility traces [Sections 12, 12.1, 12.3, 12.8, 12.9 of RLB]
• TD(λ) [Section 12.2 of RLB]
• The V-trace algorithm, IMPALA [Lasse Espeholt et al.: IMPALA: Scalable Distributed Deep-RL with Importance Weighted Actor-Learner Architectures]

10. UCB, Monte Carlo Tree Search, AlphaZero

 Dec 07 Slides PDF Slides Lecture Questions az_quiz az_quiz_randomized

• UCB [Section 2.7 of RLB]
• Monte-Carlo tree search [Guillaume Chaslot et al.: Monte-Carlo Tree Search: A New Framework for Game A]
• AlphaZero [David Silver et al.: A general reinforcement learning algorithm that masters chess, shogi, and Go through self-play

11. PopArt Normalization, R2D2, MuZero

 Dec 14 Slides PDF Slides Lecture Questions paac_lstm

• PopArt reward normalization [Matteo Hessel et al.: Multi-task Deep Reinforcement Learning with PopArt]
• Transformed rewards [Tobias Pohlen et al.: Observe and Look Further: Achieving Consistent Performance on Atari]
• Recurrent Replay Distributed DQN (R2D2) [Steven Kapturowski et al.: Recurrent Experience Replay in Distributed Reinforcement Learning]
• MuZero [Julian Schrittwieser et al.: Mastering Atari, Go, Chess and Shogi by Planning with a Learned Model]

12. Retrace, NGU, Agent57

 Dec 21 Lecture

• Retrace [Rémi Munos et al.: Safe and Efficient Off-Policy Reinforcement Learning]
• Never give up [Adrià P. Badia et al.: Never Give Up: Learning Directed Exploration Strategies]
• Agent57 [Adrià P. Badia et al.: Agent57: Outperforming the Atari Human Benchmark]

13. Explicit Memory, MERLIN, FTW

 Jan 04 Slides PDF Slides Lecture memory_game memory_game_rl

• Variational RNN [Junyoung Chung et al.: A Recurrent Latent Variable Model for Sequential Data]
• Generative temporal models with memory [Mevlana Gemici: Generative Temporal Models with Memory]
• PlaNet [Danijar Hafner et al.: Learning Latent Dynamics for Planning from Pixels]
• MERLIN model [Greg Wayne et al.:Unsupervised Predictive Memory in a Goal-Directed Agent]
• FTW agent for multiplayer CTF [Max Jaderberg et al.: Human-level performance in first-person multiplayer games with population-based deep reinforcement learning]

Requirements

To pass the practicals, you need to obtain at least 80 points, excluding the bonus points. Note that up to 40 points above 80 (including the bonus points) will be transfered to the exam.

Environment

The tasks are evaluated automatically using the ReCodEx Code Examiner.

The evaluation is performed using Python 3.8, TensorFlow 2.3.1, TensorFlow Probability 0.11.1, NumPy 1.18.5, OpenAI Gym 0.17.2 and Box2D 2.3.10. You should install the exact version of these packages yourselves. For those using PyTorch, 1.6.0 is also available.

Teamwork

Solving assignments in teams of size 2 or 3 is encouraged, but everyone has to participate (it is forbidden not to work on an assignment and then submit a solution created by other team members). All members of the team must submit in ReCodEx individually, but can have exactly the same sources/models/results. Each such solution must explicitly list all members of the team to allow plagiarism detection using this template.

bandits

 Deadline: Oct 20, 23:59  4 points  Examples

Implement the $ε$-greedy strategy for solving multi-armed bandits.

Start with the bandits.py template, which defines MultiArmedBandits environment, which has the following two methods:

• reset(): reset the environment
• step(action) → reward: perform the chosen action in the environment, obtaining a reward
• greedy(epsilon): return True with probability 1-epsilon

Your goal is to implement the following solution variants:

• alpha$=0$: perform $ε$-greedy search, updating the estimated using averaging.
• alpha$≠0$: perform $ε$-greedy search, updating the estimated using a fixed learning rate alpha.

Note that the initial estimates should be set to a given value and epsilon can be zero, in which case purely greedy actions are used.

1.39 0.08

1.48 0.22

1.37 0.09

1.52 0.04

monte_carlo

 Deadline: Oct 20, 23:59  6 points

Solve the CartPole-v1 environment environment from the OpenAI Gym using the Monte Carlo reinforcement learning algorithm. The gym environments have the followng methods and properties:

• observation_space: the description of environment observations
• action_space: the description of environment actions
• reset() → new_state: starts a new episode
• step(action) → new_state, reward, done, info: perform the chosen action in the environment, returning the new state, obtained reward, a boolean flag indicating an end of episode, and additional environment-specific information
• render(): render current environment state

We additionaly extend the gym environment by:

• episode: number of the current episode (zero-based)
• reset(start_evaluation=False) → new_state: if start_evaluation is True, an evaluation is started

Once you finish training (which you indicate by passing start_evaluation=True to reset), your goal is to reach an average return of 490 during 100 evaluation episodes. Note that the environment prints your 100-episode average return each 10 episodes even during training.

Start with the monte_carlo.py template, which parses several useful parameters, creates the environment and illustrates the overall usage.

During evaluation in ReCodEx, three different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 5 minutes.

policy_iteration

 Deadline: Oct 27, 23:59  4 points  Examples

Consider the following gridworld:

Start with policy_iteration.py, which implements the gridworld mechanics, by providing the following methods:

• GridWorld.states: return number of states (11)
• GridWorld.actions: return lists with labels of the actions (["↑", "→", "↓", "←"])
• GridWorld.step(state, action): return possible outcomes of performing the action in a given state, as a list of triples containing
  • probability: probability of the outcome
  • reward: reward of the outcome
  • new_state: new state of the outcome

Implement policy iteration algorithm, with --steps steps of policy evaluation/policy improvement. During policy evaluation, use the current value function and perform --iterations applications of the Bellman equation. Perform the policy evaluation synchronously (i.e., do not overwrite the current value function when computing its improvement). Assume the initial policy is “go North” and initial value function is zero.

    0.00↑    0.00↑    0.00↑    0.00↑
    0.00↑           -10.00←  -10.00↑
    0.00↑    0.00→    0.10←  -79.90←

    0.00↑    0.00↑    0.00↑    0.00↑
    0.00↑            -7.59←  -11.90←
    0.00→    0.08←   -0.94←  -18.36←

    0.00↑    0.00↑    0.00↑    0.00↑
    0.00↓            -5.86←   -7.41←
    0.06↓    0.01←   -0.75←  -13.49↓

    0.04↓    0.04←    0.01↑    0.00↑
    0.04↓            -0.95←   -1.00←
    0.04↓    0.04←   -0.10→   -0.52↓

   11.79↓   11.03←   10.31←    6.54↑
   12.69↓            10.14←    9.95←
   13.56→   14.59→   15.58→   16.26↓

   66.54↓   65.53←   64.42←   56.34↑
   67.68↓            63.58←   62.97←
   68.69→   69.83→   70.84→   71.75↓

policy_iteration_exact

 Deadline: Oct 27, 23:59  2 points  Examples

Starting with policy_iteration_exact.py, extend the policy_iteration assignment to perform policy evaluation exactly by solving a system of linear equations.

   -0.00→    0.00→    0.00↑    0.00↑
   -0.00↑           -12.35←  -12.35↑
   -0.85←   -8.10←  -19.62← -100.71←

    0.00→    0.00→    0.00→    0.00↑
    0.00↑             0.00←  -11.05←
   -0.00↑   -0.00→    0.00←  -12.10↓

   -0.00↓   -0.00←   -0.00↓   -0.00↑
   -0.00↑             0.00←    0.69←
   -0.00←   -0.00←   -0.00→    6.21↓

   12.12↓   11.37←    9.19←    6.02↑
   13.01↓             9.92←    9.79←
   13.87→   14.89→   15.87→   16.60↓

   12.24↓   11.49←   10.76←    7.05↑
   13.14↓            10.60←   10.42←
   14.01→   15.04→   16.03→   16.71↓

   12.24↓   11.49←   10.76←    7.05↑
   13.14↓            10.60←   10.42←
   14.01→   15.04→   16.03→   16.71↓

policy_iteration_exploring_mc

 Deadline: Oct 27, 23:59  2 points  Examples

Starting with policy_iteration_exploring_mc.py, extend the policy_iteration assignment to perform policy evaluation by using Monte Carlo estimation with exploring starts.

The estimation can now be performed model-free (without the access to the full MDP dynamics), therefore, the GridWorld.step returns a randomly sampled result instead of a full distribution.

    0.00↑    0.00↑    0.00↑    0.00↑
    0.00↑             0.00↑    0.00↑
    0.00↑    0.00→    0.00↑    0.00↓

    0.00↑    0.00↑    0.00↑    0.00↑
    0.00↑             0.00↑  -19.50↑
    0.27↓    0.48←    2.21↓    8.52↓

    0.09↓    0.32↓    0.22←    0.15↑
    0.18↑            -2.43←   -5.12↓
    0.18↓    1.80↓    3.90↓    9.14↓

    3.09↓    2.42←    2.39←    1.17↑
    3.74↓             1.66←    0.18←
    3.92→    5.28→    7.16→   11.07↓

    7.71↓    6.76←    6.66←    3.92↑
    8.27↓             6.17←    5.31←
    8.88→   10.12→   11.36→   13.92↓

policy_iteration_greedy_mc

 Deadline: Oct 27, 23:59  2 points  Examples

Starting with policy_iteration_greedy_mc.py, extend the policy_iteration_exploring_mc assignment to perform policy evaluation by using $ε$-greedy Monte Carlo estimation.

For the sake of replicability, use the provided GridWorld.epsilon_greedy(epsilon, greedy_action) method, which returns a random action with probability of epsilon and otherwise returns the given greedy_action.

    0.00↑    0.00↑    0.00↑    0.00↑
    0.00↑             0.00→    0.00→
    0.00↑    0.00↑    0.00→    0.00→

   -1.20↓   -1.43←    0.00←   -6.00↑
    0.78→           -20.26↓    0.00←
    0.09←    0.00↓   -9.80↓   10.37↓

   -0.16↓   -0.19←    0.56←   -6.30↑
    0.13→            -6.99↓   -3.51↓
    0.01←    0.00←    3.18↓    7.57↓

   -0.07↓   -0.09←    0.28←   -4.66↑
    0.06→            -5.04↓   -8.32↓
    0.00←    0.00←    1.70↓    4.38↓

   -0.04↓   -0.04←   -0.76←   -4.15↑
    0.03→            -8.02↓   -5.96↓
    0.00←    0.00←    2.53↓    4.36↓

   -0.02↓   -0.02←   -0.65←   -3.52↑
    0.01→           -11.34↓   -8.07↓
    0.00←    0.00←    3.15↓    3.99↓

importance_sampling

 Deadline: Nov 03, 23:59  2 points  Examples

Using the FrozenLake-v0 environment environment, implement Monte Carlo weighted importance sampling to estimate state value function $V$ of target policy, which uniformly chooses either action 1 (down) or action 2 (right), utilizing behaviour policy, which uniformly chooses among all four actions.

Start with the importance_sampling.py template, which creates the environment and generates episodes according to behaviour policy.

 0.00  0.00  0.00  0.00
 0.03  0.00  0.00  0.00
 0.22  0.14  0.29  0.00
 0.00  0.50  1.00  0.00

 0.00  0.01  0.02  0.00
 0.00  0.00  0.08  0.00
 0.06  0.08  0.17  0.00
 0.00  0.19  0.89  0.00

 0.02  0.01  0.04  0.01
 0.03  0.00  0.06  0.00
 0.08  0.17  0.24  0.00
 0.00  0.34  0.78  0.00

q_learning

 Deadline: Nov 03, 23:59  6 points

Solve the MountainCar-v0 environment environment from the OpenAI Gym using the Q-learning reinforcement learning algorithm. Note that this task does not require TensorFlow.

The environment methods and properties are described in the monte_carlo assignment. Once you finish training (which you indicate by passing start_evaluation=True to reset), your goal is to reach an average return of -150 during 100 evaluation episodes.

You can start with the q_learning.py template, which parses several useful parameters, creates the environment and illustrates the overall usage. Note that setting hyperparameters of Q-learning is a bit tricky – I usualy start with a larger value of $ε$ (like 0.2 or even 0.5) an then gradually decrease it to almost zero.

During evaluation in ReCodEx, three different random seeds will be employed, and you need to reach the required return on all of them. The time limit for each test is 5 minutes.

lunar_lander

 Deadline: Nov 03, 23:59  7 points + 7 bonus

Solve the LunarLander-v2 environment environment from the OpenAI Gym. Note that this task does not require TensorFlow.

The environment methods and properties are described in the monte_carlo assignment, but include one additional method:

• expert_trajectory() → initial_state, trajectory This method generates one expert trajectory and returns a pair of initial_state and trajectory, where trajectory is a list of the tripples (action, reward, next_state). You can use this method only during training, not during evaluation.

To pass the task, you need to reach an average return of 0 during 100 evaluation episodes. During evaluation in ReCodEx, three different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 5 minutes.

The task is additionally a competition and at most 7 points will be awarded according to relative ordering of your solution performances.

You can start with the lunar_lander.py template, which parses several useful parameters, creates the environment and illustrates the overall usage.

td_algorithms

 Deadline: Nov 10, 23:59 Nov 17, 23:59  5 points  Examples

Starting with the td_algorithms.py template, implement all of the following $n$-step TD methods variants:

• SARSA, expected SARSA and Tree backup;
• either on-policy (with $ε$-greedy behaviour policy) or off-policy (with the same behaviour policy, but greedy target policy).

This assignment is new, so if you think you have implemented everything correctly and it does not pass, do not hesitate to write me.

Episode 100, mean 100-episode return -360.33 +-184.47
Episode 200, mean 100-episode return -224.77 +-98.00
Episode 300, mean 100-episode return -182.97 +-100.50
Episode 400, mean 100-episode return -138.60 +-96.61
Episode 500, mean 100-episode return -106.91 +-82.49
Episode 600, mean 100-episode return -88.05 +-79.26
Episode 700, mean 100-episode return -57.03 +-53.84
Episode 800, mean 100-episode return -33.09 +-54.11
Episode 900, mean 100-episode return -30.81 +-45.75
Episode 1000, mean 100-episode return -21.21 +-35.98

Episode 100, mean 100-episode return -368.15 +-184.96
Episode 200, mean 100-episode return -207.59 +-101.46
Episode 300, mean 100-episode return -170.73 +-100.77
Episode 400, mean 100-episode return -143.05 +-97.48
Episode 500, mean 100-episode return -93.66 +-90.10
Episode 600, mean 100-episode return -66.25 +-68.43
Episode 700, mean 100-episode return -38.15 +-56.84
Episode 800, mean 100-episode return -25.82 +-44.67
Episode 900, mean 100-episode return -18.04 +-37.85
Episode 1000, mean 100-episode return -14.56 +-34.09

Episode 100, mean 100-episode return -516.63 +-256.06
Episode 200, mean 100-episode return -205.93 +-160.51
Episode 300, mean 100-episode return -169.65 +-165.20
Episode 400, mean 100-episode return -68.71 +-131.53
Episode 500, mean 100-episode return -15.79 +-45.34
Episode 600, mean 100-episode return -8.01 +-38.65
Episode 700, mean 100-episode return -6.21 +-30.64
Episode 800, mean 100-episode return -5.69 +-16.12
Episode 900, mean 100-episode return 0.68 +-8.99
Episode 1000, mean 100-episode return -1.56 +-10.94

Episode 100, mean 100-episode return -524.26 +-195.11
Episode 200, mean 100-episode return -345.41 +-181.73
Episode 300, mean 100-episode return -286.07 +-165.83
Episode 400, mean 100-episode return -249.51 +-187.19
Episode 500, mean 100-episode return -112.83 +-158.33
Episode 600, mean 100-episode return -80.56 +-145.49
Episode 700, mean 100-episode return -20.16 +-71.73
Episode 800, mean 100-episode return -17.42 +-62.07
Episode 900, mean 100-episode return -5.14 +-27.98
Episode 1000, mean 100-episode return -1.83 +-12.61

Episode 100, mean 100-episode return -361.33 +-186.01
Episode 200, mean 100-episode return -214.54 +-104.67
Episode 300, mean 100-episode return -179.69 +-103.63
Episode 400, mean 100-episode return -147.74 +-92.59
Episode 500, mean 100-episode return -109.10 +-89.53
Episode 600, mean 100-episode return -79.89 +-75.51
Episode 700, mean 100-episode return -59.05 +-57.01
Episode 800, mean 100-episode return -40.03 +-44.50
Episode 900, mean 100-episode return -25.21 +-38.41
Episode 1000, mean 100-episode return -19.67 +-34.80

Episode 100, mean 100-episode return -358.93 +-187.30
Episode 200, mean 100-episode return -221.93 +-91.20
Episode 300, mean 100-episode return -176.05 +-110.42
Episode 400, mean 100-episode return -124.69 +-92.91
Episode 500, mean 100-episode return -98.44 +-86.99
Episode 600, mean 100-episode return -64.75 +-69.56
Episode 700, mean 100-episode return -51.46 +-52.95
Episode 800, mean 100-episode return -28.69 +-44.46
Episode 900, mean 100-episode return -17.27 +-30.60
Episode 1000, mean 100-episode return -10.83 +-25.23

Episode 100, mean 100-episode return -555.15 +-204.64
Episode 200, mean 100-episode return -261.06 +-131.13
Episode 300, mean 100-episode return -144.66 +-157.24
Episode 400, mean 100-episode return -88.66 +-144.94
Episode 500, mean 100-episode return -25.55 +-69.55
Episode 600, mean 100-episode return -6.82 +-30.54
Episode 700, mean 100-episode return -2.32 +-18.24
Episode 800, mean 100-episode return -0.09 +-10.35
Episode 900, mean 100-episode return -0.06 +-14.05
Episode 1000, mean 100-episode return -0.28 +-11.60

Episode 100, mean 100-episode return -526.36 +-202.40
Episode 200, mean 100-episode return -306.17 +-167.38
Episode 300, mean 100-episode return -258.25 +-180.35
Episode 400, mean 100-episode return -146.21 +-174.19
Episode 500, mean 100-episode return -120.67 +-167.93
Episode 600, mean 100-episode return -85.25 +-153.25
Episode 700, mean 100-episode return -23.43 +-92.30
Episode 800, mean 100-episode return -21.92 +-70.71
Episode 900, mean 100-episode return -4.94 +-22.51
Episode 1000, mean 100-episode return -5.79 +-26.25

Episode 100, mean 100-episode return -361.33 +-186.01
Episode 200, mean 100-episode return -214.54 +-104.67
Episode 300, mean 100-episode return -179.69 +-103.63
Episode 400, mean 100-episode return -147.74 +-92.59
Episode 500, mean 100-episode return -109.10 +-89.53
Episode 600, mean 100-episode return -79.89 +-75.51
Episode 700, mean 100-episode return -59.05 +-57.01
Episode 800, mean 100-episode return -40.03 +-44.50
Episode 900, mean 100-episode return -25.21 +-38.41
Episode 1000, mean 100-episode return -19.67 +-34.80

Episode 100, mean 100-episode return -358.93 +-187.30
Episode 200, mean 100-episode return -221.93 +-91.20
Episode 300, mean 100-episode return -176.05 +-110.42
Episode 400, mean 100-episode return -124.69 +-92.91
Episode 500, mean 100-episode return -98.44 +-86.99
Episode 600, mean 100-episode return -64.75 +-69.56
Episode 700, mean 100-episode return -51.46 +-52.95
Episode 800, mean 100-episode return -28.69 +-44.46
Episode 900, mean 100-episode return -17.27 +-30.60
Episode 1000, mean 100-episode return -10.83 +-25.23

Episode 100, mean 100-episode return -522.36 +-226.08
Episode 200, mean 100-episode return -264.75 +-136.85
Episode 300, mean 100-episode return -163.50 +-168.74
Episode 400, mean 100-episode return -54.18 +-105.95
Episode 500, mean 100-episode return -27.66 +-70.12
Episode 600, mean 100-episode return -9.05 +-23.62
Episode 700, mean 100-episode return -4.76 +-31.53
Episode 800, mean 100-episode return -2.57 +-12.74
Episode 900, mean 100-episode return 0.58 +-12.08
Episode 1000, mean 100-episode return 1.17 +-9.07

Episode 100, mean 100-episode return -519.80 +-233.81
Episode 200, mean 100-episode return -302.58 +-123.70
Episode 300, mean 100-episode return -203.98 +-153.41
Episode 400, mean 100-episode return -95.12 +-136.49
Episode 500, mean 100-episode return -25.28 +-65.11
Episode 600, mean 100-episode return -4.79 +-19.20
Episode 700, mean 100-episode return -8.53 +-29.38
Episode 800, mean 100-episode return -5.13 +-19.44
Episode 900, mean 100-episode return -1.98 +-12.35
Episode 1000, mean 100-episode return -1.59 +-11.99

q_learning_tiles

 Deadline: Nov 10, 23:59 Nov 17, 23:59  4 points

Improve the q_learning task performance on the MountainCar-v0 environment environment using linear function approximation with tile coding. Your goal is to reach an average reward of -110 during 100 evaluation episodes.

The environment methods are described in the q_learning assignments, with the following changes:

• The state returned by the env.step method is a list containing weight indices of the current state (i.e., the feature vector of the state consists of zeros and ones, and only the indices of the ones are returned). The action-value function is therefore approximated as a sum of the weights whose indices are returned by env.step.
• The env.observation_space.nvec returns a list, where the $i$-th element is a number of weights used by first $i$ elements of state. Notably, env.observation_space.nvec[-1] is the total number of weights.

You can start with the q_learning_tiles.py template, which parses several useful parameters and creates the environment. Implementing Q-learning is enough to pass the assignment, even if both N-step Sarsa and Tree Backup converge a little faster. The default number of tiles in tile encoding (i.e., the size of the list with weight indices) is args.tiles=8, but you can use any number you want (but the assignment is solvable with 8).

During evaluation in ReCodEx, three different random seeds will be employed, and you need to reach the required return on all of them. The time limit for each test is 5 minutes.

q_network

 Deadline: Nov 10, 23:59 Nov 17, 23:59  6 points

Solve the CartPole-v1 environment environment from the OpenAI Gym using Q-learning with neural network as a function approximation.

You can start with the q_network.py template, which provides a simple network implementation in TensorFlow. Feel free to use PyTorch instead, if you like.

The continuous environment is very similar to a discrete one, except that the states are vectors of real-valued observations with shape env.observation_space.shape.

Use Q-learning with neural network as a function approximation, which for a given state returns state-action values for all actions. You can use any network architecture, but one hidden layer of several dozens ReLU units is a good start. Your goal is to reach an average return of 400 during 100 evaluation episodes.

During evaluation in ReCodEx, two different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 10 minutes (so you can train in ReCodEx, but you can also pretrain your network if you like).

car_racing

 Deadline: Nov 17, 23:59  8 points + 10 bonus

The goal of this competition is to use Deep Q Networks (and any of Rainbow improvements) on a more real-world CarRacing-v0 environment from the OpenAI Gym.

The supplied car_racing_environment.py provides the environment. It is continuous and states are RGB images of size $96×96×3$, but you can downsample them even more. The actions are also continuous and consist of an array with the following three elements:

• steer in range [-1, 1]
• gas in range [0, 1]
• brake in range [0, 1]; note that full brake is quite aggressive, so you might consider using less force when braking

Internally you should probably generate discrete actions and convert them to the required representation before the step call. The smallest set is probably left, right, gas, brake and no-op, but you can use a more fine-grained one if you like.

The environment also support frame skipping, which improves its performance (only some frames need to be rendered).

In ReCodEx, you are expected to submit an already trained model, which is evaluated on 15 different tracks with a total time limit of 15 minutes. If your average return is at least 300, you obtain 8 points. The task is also a competition and at most 10 points will be awarded according to relative ordering of your solution performances.

The car_racing.py template parses several useful parameters and creates the environment. Note that the car_racing_environment.py can be executed directly and in that case you can drive the car using arrows.

Also, you might want to use a vectorized version of the environment for training, which runs several individual environments in separate processes. The template contains instructions how to create it. The vectorized environment expects a vector of actions and returns a vector of observations, rewards, dones and infos. When one of the environments is done, it is immediately reset and state is the initial state of a new episode.

reinforce

 Deadline: Nov 24, 23:59  5 points

Solve the CartPole-v1 environment environment from the OpenAI Gym using the REINFORCE algorithm.

Your goal is to reach an average return of 490 during 100 evaluation episodes.

Start with the reinforce.py template, which provides a simple network implementation in TensorFlow. Feel free to use PyTorch instead, if you like.

During evaluation in ReCodEx, two different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 5 minutes.

reinforce_baseline

 Deadline: Nov 24, 23:59  4 points

This is a continuation of reinforce assignment.

Using the reinforce_baseline.py template, solve the CartPole-v1 environment environment using the REINFORCE with baseline algorithm.

Using a baseline lowers the variance of the value function gradient estimator, which allows faster training and decreases sensitivity to hyperparameter values. To reflect this effect in ReCodEx, note that the evaluation phase will automatically start after 200 episodes. Using only 200 episodes for training in this setting is probably too little for the REINFORCE algorithm, but suffices for the variant with a baseline.

Your goal is to reach an average return of 490 during 100 evaluation episodes.

During evaluation in ReCodEx, two different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 5 minutes.

cart_pole_pixels

 Deadline: Nov 24, 23:59  5 points + 6 bonus

The supplied cart_pole_pixels_environment.py generates a pixel representation of the CartPole environment as an $80×80$ image with three channels, with each channel representing one time step (i.e., the current observation and the two previous ones).

During evaluation in ReCodEx, three different random seeds will be employed, each with time limit of 10 minutes, and if you reach an average return at least 300 on all of them, you obtain 5 points. The task is also a competition and at most 6 points will be awarded according to relative ordering of your solution performances.

The cart_pole_pixels.py template parses several parameters and creates the environment. You are again supposed to train the model beforehand and submit only the trained neural network.

paac

 Deadline: Dec 01, 23:59  5 points

Solve the CartPole-v1 environment environment using parallel actor-critic algorithm, employing the vectorized environment described in car_racing assignment.

Your goal is to reach an average return of 450 during 100 evaluation episodes.

Start with the paac.py template, which provides a simple network implementation in TensorFlow. Feel free to use PyTorch instead, if you like.

During evaluation in ReCodEx, two different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 10 minutes.

paac_continuous

 Deadline: Dec 01, 23:59  6 points

Solve the MountainCarContinuous-v0 environment environment using parallel actor-critic algorithm with continuous actions. When actions are continuous, env.action_space is the same Box space as env.observation_space, offering:

• env.action_space.shape, which specifies the shape of actions (you can assume actions are always a 1D vector),
• env.action_space.low and env.action_space.high, which specify the ranges of the corresponding actions.

Your goal is to reach an average return of 90 during 100 evaluation episodes.

Start with the paac_continuous.py template, which provides a simple network implementation in TensorFlow. Feel free to use PyTorch instead, if you like.

During evaluation in ReCodEx, two different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 10 minutes.

ddpg

 Deadline: Dec 01, 23:59  7 points

Solve the Pendulum-v0 environment environment using deep deterministic policy gradient algorithm. The environment is continuous, states and actions are described at OpenAI Gym Wiki.

Your goal is to reach an average return of -200 during 100 evaluation episodes.

Start with the ddpg.py template, which provides a simple network implementation in TensorFlow. Feel free to use PyTorch instead, if you like.

During evaluation in ReCodEx, two different random seeds will be employed, and you need to reach the required return on all of them. Time limit for each test is 10 minutes.

walker

 Deadline: Dec 08, 23:59  8 points + 10 bonus

In this exercise exploring continuous robot control, try solving the BipedalWalker-v3 environment environment from the OpenAI Gym. The environment is continuous, states and actions are described at OpenAI Gym Wiki.

In ReCodEx, you are expected to submit an already trained model, which is evaluated with two seeds, each for 100 episodes with a time limit of 10 minutes. If your average return is at least 100, you obtain 8 points. The task is also a competition and at most 10 points will be awarded according to relative ordering of your solution performances.

You can start with the walker.py template, but should probably reuse a lot of code from ddpg.py.

walker_hardcore

 Deadline: Dec 15, 23:59  10 bonus

As an extesnion of the walker assignment, try solving the BipedalWalkerHardcore-v3 environment environment from the OpenAI Gym.

The task is a competition only and at most 10 points will be awarded according to relative ordering of your solution performances. In ReCodEx, your solution will be evaluated with two seeds, each for 100 episodes with a time limit of 10 minutes. If your average return is at least 0, ReCodEx shows the solution as correct.

You can start with the walker_hardcore.py template, but should probably reuse a lot of code from ddpg.py.

sac_bonus

 Deadline: Feb 28, 23:59  8 bonus

In this bonus-only exercise, try using the SAC algorithm to solve the Hopper environment, but using HopperBulletEnv-v0 from open-source PyBullet framework. Basic information about Gym interface is in PyBullet Quickstart Guide; generally you just need to import pybullet_envs, which will register the Gym environments.

You can install PyBullet by pip3 install pybullet. However, precompiled binaried are available for Linux only, on Windows the library must be compiled by a suitable Microsoft Visual C++ compiler.

In ReCodEx, you are expected to submit an already trained model, which is evaluated on the HopperBulletEnv-v0 environment with two seeds, each for 100 episodes with a time limit of 15 minutes. If your average return is at least 1000, you obtain 6 bonus points.

A template for the SAC algorithm will be made available.

trace_algorithms

 Deadline: Feb 28, 23:59  4 points  Examples

Starting with the trace_algorithms.py template, implement the following state value estimations:

• use $n$-step estimates for a given $n$;
• if requested, use eligibility traces with a given $λ$;
• allow off-policy correction using importance sampling with control variates, optionally clipping the individual importance sampling ratios by a given threshold.

Episode 100, mean 100-episode return -96.61 +-96.27
Episode 200, mean 100-episode return -30.95 +-57.27
Episode 300, mean 100-episode return -27.00 +-47.28
Episode 400, mean 100-episode return -11.97 +-32.78
Episode 500, mean 100-episode return -10.74 +-34.76
Episode 600, mean 100-episode return -6.70 +-32.46
Episode 700, mean 100-episode return -3.87 +-18.23
Episode 800, mean 100-episode return 0.72 +-11.11
Episode 900, mean 100-episode return -1.34 +-24.02
Episode 1000, mean 100-episode return 2.68 +-9.17
The mean 1000-episode return after evaluation -38.58 +-87.25

Episode 100, mean 100-episode return -81.76 +-98.03
Episode 200, mean 100-episode return -3.72 +-19.53
Episode 300, mean 100-episode return 0.59 +-10.51
Episode 400, mean 100-episode return 0.99 +-8.76
Episode 500, mean 100-episode return -0.35 +-9.10
Episode 600, mean 100-episode return 1.39 +-8.22
Episode 700, mean 100-episode return 2.42 +-7.80
Episode 800, mean 100-episode return 2.38 +-8.33
Episode 900, mean 100-episode return 2.79 +-7.16
Episode 1000, mean 100-episode return 0.42 +-8.51
The mean 1000-episode return after evaluation -9.03 +-57.13

Episode 100, mean 100-episode return -107.63 +-113.99
Episode 200, mean 100-episode return -3.57 +-16.96
Episode 300, mean 100-episode return 0.17 +-10.35
Episode 400, mean 100-episode return 0.20 +-8.34
Episode 500, mean 100-episode return 0.27 +-12.30
Episode 600, mean 100-episode return 1.45 +-8.57
Episode 700, mean 100-episode return 2.39 +-8.68
Episode 800, mean 100-episode return 1.92 +-8.32
Episode 900, mean 100-episode return -2.12 +-15.31
Episode 1000, mean 100-episode return -5.06 +-28.00
The mean 1000-episode return after evaluation -69.59 +-100.82

Episode 100, mean 100-episode return -87.36 +-95.03
Episode 200, mean 100-episode return -10.61 +-28.93
Episode 300, mean 100-episode return -3.48 +-15.93
Episode 400, mean 100-episode return -2.11 +-12.50
Episode 500, mean 100-episode return 1.09 +-8.20
Episode 600, mean 100-episode return 1.40 +-8.85
Episode 700, mean 100-episode return 3.78 +-7.59
Episode 800, mean 100-episode return 1.77 +-8.44
Episode 900, mean 100-episode return 0.53 +-9.03
Episode 1000, mean 100-episode return 1.73 +-7.72
The mean 1000-episode return after evaluation 7.63 +-2.44

Episode 100, mean 100-episode return -110.14 +-107.12
Episode 200, mean 100-episode return -18.70 +-45.52
Episode 300, mean 100-episode return -4.57 +-23.40
Episode 400, mean 100-episode return 1.17 +-8.73
Episode 500, mean 100-episode return 1.57 +-8.19
Episode 600, mean 100-episode return 2.46 +-8.84
Episode 700, mean 100-episode return 1.47 +-8.32
Episode 800, mean 100-episode return 0.11 +-9.15
Episode 900, mean 100-episode return 1.59 +-8.02
Episode 1000, mean 100-episode return 0.85 +-9.86
The mean 1000-episode return after evaluation 6.63 +-16.25

Episode 100, mean 100-episode return -74.33 +-71.96
Episode 200, mean 100-episode return -24.48 +-32.66
Episode 300, mean 100-episode return -19.26 +-26.23
Episode 400, mean 100-episode return -10.81 +-22.29
Episode 500, mean 100-episode return -10.40 +-19.60
Episode 600, mean 100-episode return -2.12 +-14.89
Episode 700, mean 100-episode return -3.98 +-17.19
Episode 800, mean 100-episode return -0.89 +-11.64
Episode 900, mean 100-episode return 0.04 +-9.86
Episode 1000, mean 100-episode return 1.02 +-7.64
The mean 1000-episode return after evaluation -22.17 +-73.86

Episode 100, mean 100-episode return -88.75 +-101.17
Episode 200, mean 100-episode return -28.60 +-73.61
Episode 300, mean 100-episode return -7.32 +-37.73
Episode 400, mean 100-episode return 1.85 +-8.22
Episode 500, mean 100-episode return 1.18 +-9.91
Episode 600, mean 100-episode return 3.61 +-7.13
Episode 700, mean 100-episode return 2.85 +-7.65
Episode 800, mean 100-episode return 1.69 +-7.72
Episode 900, mean 100-episode return 1.58 +-8.04
Episode 1000, mean 100-episode return 1.17 +-9.15
The mean 1000-episode return after evaluation 7.69 +-2.61

Episode 100, mean 100-episode return -122.49 +-113.92
Episode 200, mean 100-episode return -35.93 +-85.81
Episode 300, mean 100-episode return -13.67 +-58.23
Episode 400, mean 100-episode return 3.70 +-7.68
Episode 500, mean 100-episode return 1.98 +-8.26
Episode 600, mean 100-episode return 0.45 +-8.44
Episode 700, mean 100-episode return 2.41 +-8.29
Episode 800, mean 100-episode return 1.90 +-6.92
Episode 900, mean 100-episode return 3.42 +-7.81
Episode 1000, mean 100-episode return 2.59 +-7.62
The mean 1000-episode return after evaluation 7.88 +-2.69

Episode 100, mean 100-episode return -68.42 +-71.79
Episode 200, mean 100-episode return -29.45 +-42.22
Episode 300, mean 100-episode return -18.72 +-26.28
Episode 400, mean 100-episode return -13.66 +-27.16
Episode 500, mean 100-episode return -6.64 +-19.08
Episode 600, mean 100-episode return -3.34 +-14.91
Episode 700, mean 100-episode return -5.72 +-16.65
Episode 800, mean 100-episode return -0.49 +-11.18
Episode 900, mean 100-episode return -0.67 +-10.13
Episode 1000, mean 100-episode return -0.11 +-11.14
The mean 1000-episode return after evaluation -18.13 +-69.41

Episode 100, mean 100-episode return -67.42 +-80.24
Episode 200, mean 100-episode return -5.69 +-18.39
Episode 300, mean 100-episode return 0.28 +-11.68
Episode 400, mean 100-episode return 2.29 +-8.32
Episode 500, mean 100-episode return 1.61 +-8.47
Episode 600, mean 100-episode return 1.73 +-7.92
Episode 700, mean 100-episode return 1.89 +-8.27
Episode 800, mean 100-episode return 3.10 +-7.44
Episode 900, mean 100-episode return 2.72 +-8.17
Episode 1000, mean 100-episode return 2.86 +-7.23
The mean 1000-episode return after evaluation 7.81 +-2.56

Episode 100, mean 100-episode return -82.55 +-99.27
Episode 200, mean 100-episode return -0.48 +-13.67
Episode 300, mean 100-episode return 0.41 +-9.27
Episode 400, mean 100-episode return 1.35 +-8.62
Episode 500, mean 100-episode return 1.43 +-7.77
Episode 600, mean 100-episode return 1.62 +-7.91
Episode 700, mean 100-episode return 0.85 +-7.96
Episode 800, mean 100-episode return 1.99 +-7.76
Episode 900, mean 100-episode return 2.13 +-7.47
Episode 1000, mean 100-episode return 1.71 +-7.98
The mean 1000-episode return after evaluation 7.59 +-2.75

az_quiz

 Deadline: Jan 05, 23:59 (competition); Feb 28, 23:49 (non-bonus points)  10 points + 10 bonus

In this competition assignment, use Monte Carlo Tree Search to learn an agent for a simplified version of AZ-kvíz. In our version, the agent does not have to answer questions and we assume that all answers are correct.

The game itself is implemented in the az_quiz.py module, using randomized=False constructor argument.

The evaluation in ReCodEx should be implemented by returning an object implementing a method play, which given an AZ-kvíz instance returns the chosen move. The illustration of the interface is in the az_quiz_player_random.py module, which implements a random agent.

Your solution in ReCodEx is automatically evaluated against a very simple heuristic az_quiz_player_simple_heuristic.py, playing 56 games as a starting player and 56 games as a non-starting player. The time limit for the games is 15 minutes and you should see the win rate directly in ReCodEx. If you achieve at least 80%, you will pass the assignment.

The final competition evaluation will be performed after the deadline by a round-robin tournament.

Note that az_quiz_evaluator.py can be used to evaluate any two given implementations and there are two interactive players available, az_quiz_player_interactive_mouse.py and az_quiz_player_interactive_keyboard.py.

For inspiration, use the official pseudocode for AlphaZero. However, note that there are some errors in it.

• Below line 215, the following line should be inserted

  root.visit_count = 1
  

  Otherwise the visit_count is 0, ucb_score will return all zeros for all actions and during the first simulation, the last valid action in the root will always be chosen.
• On line 237, next action should be sampled according to a distribution of normalized visit counts, not according to a softmax of visit counts.
• On line 258, the value of a child should be inverted, if the player to play in the current node is the other one than in the child (which is almost always true). If the assume the values are in $[-1, 1]$ range, the fixed line should be

  value_score = - child.value()
  

• On line 279, a value is inverted using 1 - value; however, for values in $[-1, 1]$, it should be inverted as - value.
• Below line 287, the sampled gamma random variables should be normalized to produce a Dirichlet random sample:

  noise /= np.sum(noise)
  

az_quiz_randomized

 Deadline: Jan 05, 23:59  10 bonus

Extend the az_quiz assignment to handle the possibility of wrong answers. Therefore, when choosing a field, the agent might answer incorrectly.

To instantiate this randomized game variant, pass randomized=True to the AZQuiz class of az_quiz.py.

The Monte Carlo Tree Search has to be slightly modified to handle stochastic MDP. The information about distribution of possible next states is provided by the AZQuiz.all_moves method, which returns a list of (probability, az_quiz_instance) next states (in our environment, there are always two possible next states).

paac_lstm

 Deadline: Feb 28, 23:59

paac_lstm.py

memory_game

 Deadline: Feb 28, 23:59  3 points

In this exercise we explore a partially observable environment. Consider a one-player variant of a memory game (pexeso), where a player repeatedly flip cards. If the player flips two cards with the same symbol in succession, the cards are removed and the player recieves a reward of +2. Otherwise the player recieves a reward of -1. An episode ends when all cards are removed. Note that it is valid to try to flip an already removed card.

Let there be $N$ cards in the environment, $N$ being even. There are $N+1$ actions – the first $N$ flip the corresponding card, and the last action flips the unused card with the lowest index (or the card $N$ if all have been used already). The observations consist of a pair of discrete values (card, symbol), where the card is the index of the card flipped, and the symbol is the symbol on the flipped card. The env.states returns a pair $(N, N/2)$, representing there are $N$ card indices and $N/2$ symbol indices.

Every episode can be ended by at most $3N/2$ actions, and the required return is therefore greater or equal to zero. Note that there is a limit of at most $2N$ actions per episode. The described environment is provided by the memory_game_environment.py module.

Your goal is to solve the environment, using supervised learning via the provided expert episodes and networks with external memory. The environment implements an env.expert_episode() method, which returns a fresh correct episode as a list of (state, action) pairs (with the last action being None).

ReCodEx evaluates your solution on environments with 8, 12 and 16 cards (utilizing the --cards argument). For each card number, 100 episodes are simulated once you pass evaluating=True to env.reset and your solution gets 1 point if the average return is nonnegative. You can train the agent directly in ReCodEx (the time limit is 15 minutes), or submit a pre-trained one.

A template memory_game.py is available, commenting a possible use of memory augmented networks.

memory_game_rl

 Deadline: Feb 28, 23:59  5 points

This is a continuation of the memory_game assignment.

In this task, your goal is to solve the memory game environment using reinforcement learning. That is, you must not use the env.expert_episode method during training. You can start with the memory_game_rl.py template, which extends the memory_game template by generating training episodes suitable for some reinforcement learning algorithm.

ReCodEx evaluates your solution on environments with 4, 6 and 8 cards (utilizing the --cards argument). For each card number, your solution gets 2 points (1 point for 4 cards) if the average return is nonnegative. You can train the agent directly in ReCodEx (the time limit is 15 minutes), or submit a pre-trained one.

Install

• Installing to central user packages repository

  You can install all required packages to central user packages repository using pip3 install --user tensorflow==2.3.1 tensorflow_probability==0.11.1 numpy==1.18.5 gym==0.17.2 box2d==2.3.10.

• Installing to a virtual environment

  Python supports virtual environments, which are directories containing independent sets of installed packages. You can create the virtual environment by running python3 -m venv VENV_DIR followed by VENV_DIR/bin/pip3 install tensorflow==2.3.1 tensorflow_probability==0.11.1 numpy==1.18.5 gym==0.17.2 box2d==2.3.10.

ReCodEx

• What files can be submitted to ReCodEx?

  You can submit multiple files of any type to ReCodEx. There is a limit of 20 files per submission, with a total size of 20MB.

• What file does ReCodEx execute and what arguments does it use?

  Exactly one file with py suffix must contain a line starting with def main(. Such a file is imported by ReCodEx and the main method is executed (during the import, __name__ == "__recodex__").

  The file must also export an argument parser called parser. ReCodEx uses its arguments and default values, but is overwrites some of the arguments depending on the test being executed – the template should always indicate which arguments are set by ReCodEx and which are left intact.

• What are the time and memory limits?

  The memory limit during evaluation is 1.5GB. The time limit varies, but should be at least 10 seconds and at least twice the running time of my solution.

Competitions

• Which algorithms are allowed during competitions?

  Unless stated otherwise, you can use any algorithm to solve the competition task at hand. However, the implementation should be either created by you or you should understand it fully (i.e., if you use for example PPO algorithm, you should know how it works and how it is implemented).

Requirements

To pass the practicals, you need to obtain at least 80 points, excluding the bonus points. Note that up to 40 points above 80 (including the bonus points) will be transfered to the exam. In total, assignments for at least 120 points (not including the bonus points) will be available.

To pass the exam, you need to obtain at least 60, 75 and 90 out of 100-point exam, to obtain grades 3, 2 and 1, respectively. (PhD students with binary grades require 75 points.) The exam consists of 100-point-worth questions from the list below (the questions are randomly generated, but in such a way that there is at least one question from every lecture 1 to 11). In addition, you can get at most 40 surplus points from the practicals and at most 10 points for community work (i.e., fixing slides or reporting issues) – but only the points you already have at the time of the exam count.

Exam Questions

Lecture 1 Questions

• Derive how to incrementally update a running average (how to compute an average of $N$ numbers using the average of the first $N-1$ numbers). [5]

• Describe multi-arm bandits and write down the $\epsilon$-greedy algorithm for solving it. [5]

• Define a Markov Decision Process, including the definition of a return. [5]

• Describe how does a partially observable Markov decision process extend the Markov decision process and how is the agent altered. [5]

Lecture 2 Questions

• Define a value function, such that all expectations are over simple random variables (actions, states, rewards), not trajectories. [5]

• Define an action-value function, such that all expectations are over simple random variables (actions, states, rewards), not trajectories. [5]

• Express a value function using an action-value function, and express an action-value function using a value function. [5]

• Define optimal value function and optimal action-value function. Then define optimal policy in such a way that its existence is guaranteed. [5]

• Write down the Bellman optimality equation. [5]

• Define the Bellman backup operator. [5]

• Write down the value iteration algorithm. [5]

• Define the supremum norm $||\cdot||_\infty$ and prove that Bellman backup operator is a contraction with respect to this norm. [10]

• Formulate and prove the policy improvement theorem. [10]

• Write down the policy iteration algorithm. [10]

• Write down the tabular Monte-Carlo on-policy every-visit $\epsilon$-soft algorithm. [10]

Lecture 3 Questions

• Write down the Sarsa algorithm. [10]

• Write down the Q-learning algorithm. [10]

• Write down the Double Q-learning algorithm. [10]

• Elaborate on how can importance sampling estimate expectations with respect to $\pi$ based on samples of $b$. [5]

• Show how to estimate returns in the off-policy case, both with (1) ordinary importance sampling and (2) weighted importance sampling. [10]

• Write down the Expected Sarsa algorithm and show how to obtain Q-learning from it. [10]

• Show the bootstrapped estimate of $n$-step return. [5]

• Write down the update in on-policy $n$-step Sarsa (assuming you already have $n$ previous steps, actions and rewards). [5]

• Write down the update in off-policy $n$-step Sarsa with importance sampling (assuming you already have $n$ previous steps, actions and rewards). [10]

• Write down the update of $n$-step Tree-backup algorithm (assuming you already have $n$ previous steps, actions and rewards). [10]

Lecture 4 Questions

• Assuming function approximation, define Mean squared value error. [5]

• Write down the gradient Monte-Carlo on-policy every-visit $\epsilon$-soft algorithm. [10]

• Write down the semi-gradient $\epsilon$-greedy Sarsa algorithm. [10]

• Prove that semi-gradient TD update is not an SGD update of any loss. [10]

• What are the three elements causing off-policy divergence with function approximation? Write down the Baird's counterexample. [10]

• Explain the role of a replay buffer in Deep Q Networks. [5]

• How is the target network used and updated in Deep Q Networks? [5]

• Explain how is reward clipping used in Deep Q Networks. What other clipping is used? [5]

• Formulate the loss used in Deep Q Networks. [5]

• Write down the Deep Q Networks training algorithm. [10]

Lecture 5 Questions

• Explain the difference between DQN and Double DQN. [5]

• Describe prioritized replay (how are transitions sampled from the replay buffer, how up-to-date the priorities [according to which we sample] are, how are unseen transitions boosted, how is importance sampling used to account for the change in the sampling distribution). [10]

• How is the action-value function computed in dueling networks? [5]

• Describe a fully connected layer in Noisy nets (parametrization, computation, effective noise generation). [5]

• In Distributional RL, describe how is the distribution of rewards represented and how it is predicted using a neural network. [5]

• Write down the Bellman update in Distributional RL (the mapping of atoms does not need to be mathematically flawless, it is enough to describe how it should be done). [5]

• Formulate the loss used in Distributional RL. [5]

Lecture 6 Questions

• Formulate the policy gradient theorem. [5]

• Prove the part of the policy gradient theorem showing the value of $\nabla_{\boldsymbol\theta} v_\pi(s)$. [10]

• Assuming the policy gradient theorem, formulate the loss used by the REINFORCE algorithm and show how can its gradient be expressed as an expectation over states and actions. [5]

• Write down the REINFORCE algorithm. [10]

• Show that introducing baseline does not influence validity of the policy gradient theorem. [5]

• Write down the REINFORCE with baseline algorithm. [10]

• Write down the one-step Actor-critic algorithm. [10]

• How and why is entropy regularization used in policy gradient algorithms? [5]

• The Asynchronous advantage actor-critic (A3C) policy may utilize recurrent neural networks. How is the training structured to allow backpropagation through them (would vanilla DQN, vanilla REINFORCE, vanilla actor-critic work with recurrent neural networks)? [5]

Lecture 7 Questions

• Explain the difference between a regular Actor-critic and Parallel Advantage Actor Critic algorithms. [5]

• Considering continuous actions modeled by a normal distribution with diagonal covariance, describe how is the policy distribution computed (network architecture, output activation functions) and how does the loss of a simple REINFORCE algorithm look like. [5]

• Formulate the deterministic policy gradient theorem for $\nabla_{\boldsymbol\theta} v_\pi(s)$. [5]

• Formulate the deterministic policy gradient theorem for $\nabla_{\boldsymbol\theta} J(\boldsymbol\theta)$. [5]

• Prove the part of the deterministic policy gradient theorem showing the value of $\nabla_{\boldsymbol\theta} v_\pi(s)$. [10]

• Write down the critic loss (or its derivative) and the actor policy loss (or its derivative) of the Deep Determinisic Policy Gradients (DDPG) algorithm. Make sure to distinguish the target networks from the ones being trained. [10]

Lecture 8 Questions

• How is the return in the Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm estimated? [5]

• Write down the critic loss (or its derivative) and the actor policy loss (or its derivative) of the Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm. Make sure to distinguish the target networks from the ones being trained. [10]

Lecture 9 Questions

• Define a one-step TD error and express the $n$-step return as a sum of them. [5]

• Define a one-step TD error and express the $n$-step return with off-policy correction as a sum of them. [5]

• Define the $\lambda$-return. [5]

• Define the $n$-step truncated $\lambda$-return. [5]

• Define a one-step TD error and express the $n$-step truncated $\lambda$-return as a sum of them. [5]

• Define a one-step TD and express the $n$-step truncated $\lambda$-return with off-policy correction as a sum of them. [5]

• Define the V-trace estimate and write down the policy to whose value function the V-trace estimate converges to. [10]

• Explain why the fixed point of the V-trace operator does not depend on the truncation of all but the last importance sampling ratios. [10]

• Write down the critic loss (or its derivative) and the actor policy loss (or its derivative) of the IMPALA algorithm. [10]

• Sketch the population based training used in the IMPALA algorithm. [10]

Lecture 10 Questions

• Considering multi-arm bandits, write down the UCB algorithm. [5]

• Describe the inputs and outputs of a neural network used in AlphaZero, and describe the inputs and outputs of a Monte-Carlo tree search. [5]

• Write down the loss used in AlphaZero algorithm. [5]

• What quantities are kept in a node of a Monte-Carlo tree search? [5]

• How are actions selected in a Monte-Carlo tree search? [10]

• What does AlphaZero use to maintain exploration in a Monte-Carlo tree search? [5]

• Describe the backup phase of Monte-Carlo tree search, i.e., the steps you perform when you reach a leaf during the tree search. [5]

• How are the actions selected in AlphaZero self-play? [5]

Lecture 11 Questions

• In PopArt normalization, the value function is computed based on a normalized value predictor $n$ as $\sigma n + \mu$. Describe how to maintain $\sigma$ and $\mu$, how to compute normalized advantage based on return $G$, and how is the normalized value predictor modified when the estimates of $\sigma$ and $\mu$ change. [10]

• Define the transformed Bellman operator. [5]

• Define the transformed Bellman operator. Then, assuming $h$ is strictly monotonically increasing function and considering a deterministic Markov decision process, show to what does a transformed Bellman operator $\mathcal{T}_h$ converge and prove it. [10]

• Write down the return transformation used for Atari environments (for example by R2D2). [5]

• Describe the replay buffer elements in R2D2. What is the difference between the zero-state and stored-state strategies, and how is burn-in used? [5]

Related Courses

Deep Learning

Course introducing deep neural networks, from the basics to the latest advances, focusing both on theory as well as on practical aspects.

Machine Learning for Greenhorns

Introductory course to machine learning, focusing both on theoretical foundations as well as on practical applications in Python.

Archive

Winter 2019/20

Winter 2018/19